Customization: | Available |
---|---|
Certification: | ISO9001, CE |
Salt Rejection Rate: | 98.0% |
Still deciding? Get samples of US$ 3000/Set
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
• As the content of salt in the seawater is too high, that can not be used directly, there are mainly two methods to desalinate seawater, distillation and reverse osmosis. Distillation is mainly used for super-huge type seawater desalination and heat energy rich area, energy consumption is very high. Reverse Osmosis is very widely applicable, low energy consumption and high desalination rate, so it's widely used.
• We use the best quality of seawater RO membrane. The membrane's salt removing rate is very high, with stable performance, safe and reliable. The HP pump we used is the international brand which is specialized in seawater desalination, with high and low pressure protection device, ensure the safety and reliable of the equipment. The treated water quality meets the national life drinking water quality standards (GB5749-85), do not add any chemicals, can be used for direct drinking, fresh and sweet.
• For the portable use, reliable water, cheap price etc., after a long time of design and practice, we integrate the reliable technology and advanced technology, make our equipment stand out! From here on, you will experience the different use feelings!
Portable seawater desalination machine models and main parameters:
(1) Model: XST-SWRO-500LPD
SWRO-500LPD |
|||
Flow rate |
25L/H |
Recovery rate |
4% |
Voltage |
220V,50Hz |
Power |
1.9KW |
Feed water TDS |
< 40000ppm |
Output water TDS |
< 600ppm |
Working pressure |
<850psi |
Working temperature |
10-45ºC |
Feed water residual chlorine |
< 0.1ppm |
Feed water SDI |
< 5 |
Feed water turbidity |
< 1 |
Feed water PH |
Neutral |
Equipment specification |
640*500*550(mm) |
Equipment net weight |
About 60Kg |
Plywood case packing |
750*600*790(mm) |
Packing total weight |
About 80Kg |
(2) Model: XST-SWRO-1000LPD
SWRO-1000LPD |
|||
Flow rate |
50L/H |
Recovery rate |
8% |
Voltage |
220V,50Hz |
Power |
1.9KW |
Feed water TDS |
< 40000ppm |
Output water TDS |
< 600ppm |
Working pressure |
< 850psi |
Working temperature |
10-45ºC |
Feed water residual chlorine |
< 0.1ppm |
Feed water SDI |
< 5 |
Feed water turbidity |
< 1 |
Feed water PH |
Neutral |
Equipment specification |
640*500*550(mm) |
Equipment net weight |
About 70Kg |
Plywood case packing |
750*600*790(mm) |
Packing total weight |
About 90Kg |
(3) Model: XST-SWRO-2000LPD
SWRO-2000LPD |
|||
Flow rate |
100L/H |
Recovery rate |
15% |
Voltage |
220V,50Hz |
Power |
1.9KW |
Feed water TDS |
< 40000ppm |
Output water TDS |
< 600ppm |
Working pressure |
< 850psi |
Working temperature |
10-45ºC |
Feed water residual chlorine |
< 0.1ppm |
Feed water SDI |
< 5 |
Feed water turbidity |
< 1 |
Feed water PH |
Neutral |
Equipment specification |
1100*500*500(mm) |
Equipment net weight |
About 80Kg |
Plywood case packing |
1230*600*730(mm) |
Packing total weigh |
About 101Kg |
(4) Model: XST-SWRO-3000LPD
SWRO-3000LPD |
|||
Flow rate |
150L/H |
Recovery rate |
20% |
Voltage |
220V,50Hz |
Power |
1.9KW |
Feed water TDS |
< 40000ppm |
Output water TDS |
< 600ppm |
Working pressure |
< 850psi |
Working temperature |
10-45ºC |
Feed water residual chlorine |
< 0.1ppm |
Feed water SDI |
< 5 |
Feed water turbidity |
< 1 |
Feed water PH |
Neutral |
Equipment specification |
1100*500*650(mm) |
Equipment net weight |
About 90Kg |
Plywood case packing |
1230*600*810(mm) |
Packing total weigh |
About 115Kg |
(5) Model: XST-SWRO-5000LPD
SWRO-5000LPD |
|||
Flow rate |
250L/H |
Recovery rate |
15-20% |
Applicable power |
AC380V,50HZ |
Rated power |
5KW |
Feedwater TDS |
<38000ppm |
freshwater TDS |
<600ppm |
Working pressure |
<6Mpa |
operating temperature |
10-45ºC |
Feedwater residual chlorine |
<0.1ppm |
Feedwater SDI |
<5 |
Feedwater turbidity |
<1NTU |
Feedwater PH value |
Neutral |
Equipment specification |
92X95X145(cm) |
Equipment net weight |
220Kg |
Packing specification(wooden box) |
104X100X154(cm) |
Packing gross weight |
280Kg |
(6) Model: XST-SWRO-10000LPD
SWRO-10000LPD |
|||
Flow rate |
500L/H |
Recovery rate |
25-30% |
Applicable power |
AC220V,50HZ |
Rated power |
5KW |
Feedwater TDS |
<38000ppm |
freshwater TDS |
<600ppm |
Working pressure |
<6Mpa |
operating temperature |
10-45ºC |
Feedwater residual chlorine |
<0.1ppm |
Feedwater SDI |
<5 |
Feedwater turbidity |
<1NTU |
Feedwater PH value |
Neutral |
Equipment specification |
92X95X145(cm) |
Equipment net weight |
250Kg |
Packing specification(wooden box) |
104X100X154(cm) |
Packing gross weight |
310Kg |
1. Portable seawater desalination machine also has modern design and high integration etc. characteristics.
2. Portable seawater desalination machine, small size, light weight, moveable design, easy to move and assemble.
3. Portable seawater desalination machine has most matching accessories, can directly use after connect with water and power, easy operation.
4. Portable seawater desalination machine has a wide range of power supply, can be connected with common household AC power, gasoline/diesel generator, also can be connected with solar and wind etc. environmental energy.