| Customization: | Available |
|---|---|
| Certification: | ISO9001, CE |
| Salt Rejection Rate: | 99.5% |
|
Still deciding? Get samples of US$ 200/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
8 Inch 8040 RO Reverse Osmosis Membrane with Low Pressure for Water Purifier System RO Membrane
UltraClean BW reverse osmosis membrane elements are primarily used for brackish water desalination, providing excellent, stable and consistent membrane performance for industrial water treatment systems. The element operates at low pressure, providing a more cost-effective option for industrial-grade applications. For more difficult dissolved salts, such as TOC, SiO2, etc., it has a high removal rate. It is suitable for near-zero discharge of wastewater in the petroleum and petrochemical industries and boiler feed water in thermal power plants.
Product Highlights
1.High flux and high salt rejection
2.Low operating cost and good economic benefits
UC LP/ULP/XLP Product Model
| UC LP/ULP/XLP | ||||||
| S/NO. | TYPE | MODEL | Effective membrane area ft(m2) |
Parameters(under standard condition) | ||
| Average water flow | minimum desalting rate | stable desalting rate | ||||
| GPD(m³/d) | (%) | (%) | ||||
| 1 | Low pressure | UC LP-4040-82 | 82(7.6) | 2,050(7.8) | 99 | 99.5 |
| UC LP-8040-400 | 400(37) | 10,500(40) | 99 | 99.5 | ||
| 2 | super low pressure | UC ULP-4040-82 | 82(7.6) | 2250(8.7) | 99 | 99.3 |
| UC ULP-8040-400 | 400(37) | 11500(43.5) | 99 | 99.3 | ||
| UC ULP-8040-440 | 440(41) | 12650(48) | 99 | 99.3 | ||
| 3 | Extreme low pressure | UC XLP-4040-82 | 82(7.6) | 2250(8.7) | 98 | 99 |
| UC XLP-8040-400 | 400(37) | 10500(40) | 98 | 99 | ||
| UC XLP-8040-440 | 440(41) | 12650(48) | 98 | 99 | ||
Membrane Specification
| A inch(mm) | B inch(mm) | C inch(mm) |
| 40 (1016) | 1.125 (29) | 7.9 (201) |
| Effective Membrane Area ft²(m²) |
Stablized Rejection Rate(%) |
Minimum Rejection rate(%) |
Flux gpd(m³/d) |
| 400 (37) | 99.5 | 99.0 | 10500 (40) |
Test conditions: inlet pressure 1.55 MPa (225 psi); inlet temperature 25°C (77°F); inlet water quality 2000ppm NaCl; inlet pH 8; recovery 15%.
Operating and Cleaning Limits
| Maximum operating temperature | 113 ºF (45ºC) |
| Maximum operating pressure | 600 psi (41 bar) |
| Maximum pressure drop | 15 psi (1.0 bar) |
| pH range | 1-13 |
| Maximum Influent Sludge Density Index SDI | 5 |
| Free chlorine tolerance | < 0.1 ppm |
Permeate flow for individual elements may vary ±15 percent from the value specifed.
Active membrane area guaranteed ±4%.
Stabilized salt rejection is generally achieved within 24-48 hours of continuous use; depending upon feedwater characteristics and operating conditions.
Reverse osmosis(RO) system
Reverse osmosis process is the world's advanced, energy-saving and effective separation technology now, with a filtration accuracy of 0.001 μm, to completely separate and remove all particles of soluble salts, colloids, organics, microorganisms, viruses,bacteria, rust, and heavy metals in water. It requires pressure to force pure water across a membrane, leaving the impurities behind.
However, note that reverse osmosis systems are not ideal for treating water that is very hard and/or with significant quantities of contaminants. In this case, to extend the operating life of the membrane, the water should be pre-treated before entering reverse osmosis membranes (filtering, deferrization, etc.).
){kind=link}