8m3/H Underground Water Softeners Ion Exchange Reactors

• Customization: Available
• Certification: ISO9001, CE
• Salt Rejection Rate: 98.0%
• Model NO.: XSTRT-8000L/H
• Application: Industry
• Capacity: 8000L/H
• Materials: FRP, Stainless Steel
• Voltage: 110V/220V/380V
• Control Method: Manual, Automatic
• Mediums: Resin
• Brine Tank: PE, 40-500L
• Functions: Remove Ca,Mg for Lower Hardness
• Applications: Drinking, Irrigation,Chemicals, Pharmaceuticals Et
• Transport Package: Wooden Box with Pallet
• Specification: 1.6m*1.5m*1.8m
• Trademark: XST
• Origin: China
• HS Code: 842121
• Production Capacity: 500sets/Month

Product Description

20years experiences Manufacturer supply 250L/H-1000T/H WATER SOFTENER! CUSTOMIZED SERVICE IS AVAILABLE!

Water Softener
Water softener is just a special type of "filter" that removes the calcium and magnesium in hard water by using sodium cation exchange resin, which avoid carbonate scale phenomenon in pipelines, containers, boilers. At the same time, Water softener can greatly save the investment cost and ensure the smooth production.

What does a Water Softener do?
Water softeners use a process called ion exchange. The softener unit contains a column filled with beads of a resin which remove the dissolved calcium and magnesium ions from the hard water flowing through it, replacing them with sodium. Periodically, (typically once a day) the softener regenerates the resin by washing with brine (sodium chloride solution), carrying the calcium and magnesium to drain, and leaving fresh sodium ions on the resin ready for the next treatment cycle. Regeneration is usually triggered automatically by either an electronic timer or mechanical water flow meter. The unit has to be refilled with salt (in the form of granules, small tablets or blocks) typically once a month.

Dual-Tank Water Softener
When a water softener is recharging, it is designed to disconnect from the water system, so it is basically out of commission. For this reason, the regeneration cycle is usually set to occur at night. If softened water is needed during the regeneration cycle, this can be problematic.
If the down time of the water softener is an issue, or if a family is large or lives where water is particularly hard, it may be smart to consider a dual-tank water-softening unit with two resin tanks. With a dual-tank unit, when one tank is in use, the other is regenerating. As a result, softened water is being supplied continuously, without any break in service. And because these units operate on demand, they can be sized smaller than single-tank units.

Model NO	Output Water m3/Hr	Tank Size Height×Qty	Salt Box Qty	Resin(L)	Salt Consumption (KGS)	Pipe DN (inch)
XSTRT-02-05/F	0.5	0844x1	25x1	25	5	1
XSTRT-025-1/F	1	1054x1	60x1	50	10	1
XSTRT-03-2/F	2	1252x1	100x1	75	15	1
XSTRT-035-3/F	3	1465x1	100x1	100	20	1
XSTRT-04-4/F	4	1665x1	150x1	125	25	1
XSTRT-05-6/F	5~6	2072x1	200x1	225	45	1
XSTRT-06-10/F	8~10	2472x1	350x1	300	60	1.5
XSTRT-075-10/F	10~13	3072x1	500x1	525	105	1.5

Main components of XST Water Softener:

S/N.	Item Name	Material and Brand	Function
1	Control valve	RUNXIN Valve, Fleck Valve;	Control the flow of water into and out of the mineral and brine tanks during regeneration.
2	Mineral tank/Softener tank	FRP, SUS304, SS316L, Carbon steel;	It is where the water filtration takes place and the hard water is softened
3	Brine tank	PE	where a highly concentrated solution of salt or potassium is stored
4	Water Distributors	Top and bottom distributors
5	Chemicals	Salt, resin

Application of Water Softener
Water softener has been widely used in various steam boilers, hot water boilers, heat exchangers, steam condensers, air conditioners, direct gas turbines and other equipment and systems of circulating supply water. Water softener is also used for domestic water treatment, food, electroplating, medicine, chemical industry, printing and dyeing, textile, electronics and other industrial water treatment as well as pre-treatment of desalting system. The hardness of produced water can be greatly reduced after single or multistage water softener treatment.


FAQ                                                                         
Q1. Why I choose your company?
A1: Our factory has professional technical team and advanced production line.
100% factory quality assurance, 12 months warranty and lifetime maintenance;
Q2. Which machine should I choose?
A2: It depends on your inlet water quality and output water requirements, we have professional sales team and engineers team, welcome to inquiry.
Q3.: The logo, language and color can be customized?
A3: Yes, welcome you to sample custom, and also can provide the pictures or requirements for design.
Q4: Could you provide the picture and video for our retail advertising?
A4: Yes, high-definition pictures will be provided which can be used for your clients, your online shop or official website;
Q5: Do you provide installation and training?
A5: Yes, synchronous drawings and operation manual will be provided, and also we can send our technician to your site for installation or training if necessary.
Q6: What's your machine size?
A6: It depends on the output flow requirement and we can make changes according to your space.